包射网哪里去了

<form id=gZCJUkMUm><nobr id=gZCJUkMUm></nobr></form>

<address id=gZCJUkMUm><nobr id=gZCJUkMUm><nobr id=gZCJUkMUm></nobr></nobr></address>

400 666 0166

浙江可瑞斯環保科技有限公司

熱門關鍵詞：離心風機高壓風機防爆風機高溫風機

您的位置： 首頁 > 解決方案 > 石化行業

石化行業解決方案solution

: 石化行業背景

石化行業的挥发物（VOCS）一般是一大类气态污染物的统称，它主要在常温常压下，沸点低于260度，蒸气压小于70pa。具有持久存在和积累性的特点，在紫外线的作用下，可生成光化学烟雾和二次污染物，酸雨、光化学污染、城市雾霾等都与之相关。石化行業产生的VOCS排放源很复杂，其中产生的废气会对人的神经、肾脏和肝脏产生伤害，且具有致癌的作用，因此做好治理工作对石化行業的发展很重要。

廢氣成分簡介/ Ingredient Profile

石化企業在生産過程中産生的廢氣成分相對複雜，有粒子粉塵類物質、含硫化合物、含氮化合物、一氧化碳、烴類、苯類以及含鹵化合物。

常見處理工藝/ Processing technology

石化行業常见的一些工艺有：冷凝回收、吸收法、膜分离法、直接燃烧法、多相催化氧化、RCO/RTO等。

行業風機技術要求/ skills requirement

石化行業有相对复杂的管网系统和处理工艺，从材质上考虑一般选择玻璃鋼風機、碳钢风机和不锈钢风机，低压、中压和高壓風機均有，对风机的轴封密闭性要求也比较高，通常要求风机具备BT4、CT4和粉尘防爆要求。从形式上考虑以D式和C式风机居多。

案例展示Case show

項目名稱：衛星能源-平湖石油

行業類別：石化行業
項目地址：浙江省平湖市
風機型號和數量： ZYF-10C-45KW；1台
使用單位：STL衛星能源平湖石化

項目名稱：廣州中石科技有限公司

行業類別：石化行業
項目地址：廣州市
風機型號和數量： ZYF-7C-18.5KW；1台
使用單位：廣州中石科技有限公司

更多案例More cases

: 玻璃钢離心風機其他部件使用注意事项

玻璃钢離心風機其他部件使用注意事项在使用玻璃钢離心風機之前，应当对设备认真查看，为了保证公司设备的部件在运转时无任何出错情况，不然部件发生任何差错，就可能造成影响风机设备的使用这种情况。

: 某新能源公司金屬風機合作案例！

客戶公司一家擁有磁性材料+器件、光伏+锂電兩大産業的高新技術民營企業。可瑞斯在19年接到了客戶負責人的電話，在電話中客戶向我們表達了需要一台金屬風機的需求。

: 某环保设备公司碳钢高壓風機合作案例！

客户公司是一家以研究制造泵、阀等流体输送设备、电气控制系统、控压设备和环保设备的多元化经营的大型集团企业，工厂由于有大量的加热设备，室内温度很高，前期采用的是10P空调5台，没有达到降温需求，所以联系可瑞斯购买了我们的碳钢高壓風機用于车间。

浙江可瑞斯環保科技有限公司

400 666 0166

E-mail：krsfan@163.com

公司總部：杭州市蕭山區甯圍鎮民和路600號大象國際

生産基地：浙江省東陽市湖溪鎮夏黃工業區

關注

關注KRS 抖音

關注KRS公众号

浙江可瑞斯環保科技有限公司備案號：浙ICP備19015397號網站制作：牛商股份百度統計

在線咨詢
服務热线

400 666 0166
客服微信
在線留言
返回頂部

"But this does not explain him," broke in the Doctor, bitterly. "As I remarked before," Gregg resumed, coolly, "you were not in a fit state to carry[Pg 182] out the investigation. You could not bring yourself to accept even the obvious. Fortunately you remembered some of the most salient facts. Those tubes fitted into the clock, for example; I regard those as highly suggestive. Think of it, Allingham! The energy of generations compressed into a tube and so utilised by a single individual. For that is what must have happened in the year 8000. The scientists must have discovered means of gathering up and storing nervous energy. Everybody has this extra reserve of force. That solved one problem. Then there was the question of a better distribution. They had to invent a new nervous system. If we ever have an opportunity of examining the Clockwork man thoroughly, we shall find out what that system is. Speaking in rough terms, we may assume that it is probably an enlargement of the compass of what we call afferent and efferent impulses. There will also be new centres, both of reflex and voluntary action. Each impulse, in this new system, has a longer range of effectiveness, a greater duration in time." Civil engineering, when spoken of, will be assumed as referring to works that do not involve machine motion, nor the use of power, but deal with static forces, the strength, nature, and disposition of material under constant strains, or under measured strains, the durability and resistance of material, the construction of bridges, factories, roads, docks, canals, dams, and so on; also, levelling and surveying. This corresponds to the most common use of the term civil engineering in America, but differs greatly from its application in Europe, where civil engineering is understood as including machine construction, and where the term engineering is applied to ordinary manufacturing processes. For pulleys, gear wheels, or other standard parts of machinery which are not likely to be modified or changed, iron patterns are preferable; patterns for gear wheels and pulleys, when made of wood, aside from their liability to spring and warp, cannot be made sufficiently strong to withstand foundry use; besides, the greatest accuracy that can be attained, even by metal patterns, is far from producing true castings, especially for tooth wheels. The more perfect patterns are, the less rapping is required in drawing them; and the less rapping done, the more perfect castings will be. (1.) Why are shaping machines better adapted than planing machines for planing slots, key-ways, and so on?—(2.) What objects are gained by a quick return motion of the cutter bar of shaping machines? I. “Oh, I think he’s all right,” argued Larry. “But stop and think of these things,” he continued, urging his two friends to use their own imaginations. “The amphibian was old-looking and didn’t seem to be much good, and the gas gauge was broken, and the chewing gum was quite fresh. That might look as though——” The Chiricahuas might stay there and fire at intervals as long as they listed, killing a few men perhaps. And then they might retreat quite safely, putting the barrier[Pg 277] between themselves and the pursuers. Obviously there were only two courses wherein lay any wisdom,—to retreat, or to cut off their retreat. Landor said so to the major in command. THAT evening Lieut. Bowersox sent a telegram to Deacon Klegg. It had to be strictly limited to 10 words, and read: "Why, you shoved our car out there into the brush and went off and left us. We thought we had to look out for ourselves," explained Harry. "Can't we hang 'em, anyway?" he added in an appealing tone, and the rest of the boys looked wistfully at Si for permission to proceed. "Trust Corpril Elliott," said Gid, returning to his old partisanship of the taller veteran. "He knows his business every time." Chapter 21 "Rose, marry me." "The bondman may be freed," replied the man who had before spoken; "but when shall the freeman be righted? I took little heed of these things when I heard you preach freedom to the villeins two years ago: but my children have been sick; my wife has been struck with a palsy; and I, who had not a penny to call my own, gave eleven groats yesterday for myself, my wife, and the two boys; and to-morrow must I sell the last blanket that covers her, to pay the twelfth." HoME 包射网哪里去了 ENTER NUMBET 0010colliseq.org.cn
dbzulu.org.cn
firenzi.com.cn
www.huangshu.org.cn
www.lingjuliseo.com.cn
moxchi.com.cn
qondan.com.cn
shdongqiandianzi.com.cn
www.zcdd.com.cn
www.zcxltjd.com.cn